Description
This is the Airtronics MT-4S Super 2.4GHz Computer Radio System with SSL and Telemetry. The MT-4S builds on the original MT-4 by adding Sanwa Synchronized Link support, increased response time (same as the M12), a backlit LCD, RX-472 Super Response receiver and updated steering wheel and graphics.
Features:
- 4-Channel 2.4GHz FH4T Digital High-Response Telemetry System with Advanced Programming
- Backlit LCD Screen Allows You to Easily View Programming Options and Telemetry Data in All Types of Conditions
- High-Power FH4T Technology Provides the Best Reception and Connectivity, Giving Racers Added Assurance
- 4-Cell Dry Battery Holder for Lighter Weight – Also Accepts Optional NiCd/NiMH or 2S LiPo/LiFe Battery Packs
- Includes RX-472 2.4GHz FH4T Super Response Receiver w/Sanwa Synchronized Link Support
- 18 Model Memory
- Telemetry Logging
- Channel Set Menu
- Servo Reversing
- Steering, Throttle and Brake Dual Rate
- End Point Adjustment
- Exponential and ARC Adjustment
- Servo Speed Adjustment
- Anti-Lock Braking
- Throttle Offset
- Lap and Interval Timers
- Total, Best and Individual Lap Display
- Four Wheel Steering Mixing
- Dual Throttle Mixing w/Dig & Burn
- Normal, SSR and SHR Servo Modes
- Center or Parallel Trim Types
- CODE Auxiliary
- Step Auxiliary
- Point Auxiliary
- Auxiliary Mixing
- Programmable Fail Safe
- Receiver Battery Voltage Fail Safe
- Digital Trims
- Servo Sub-Trim
- Adjustable Throttle Trigger
- Programmable Switches, Lever and Dial
- Adjustable Steering Wheel
- Adjustable Grip
- Variable Rate Adjustment
- Model Naming
- Model Select
- Direct Model Select
- Model Clear
- Selectable Modulation Type
- Adjustable LCD Contrast and On-Time
- Adjustable Key Volume and Tone
- Programmable Low Voltage Alarm
- Inactivity and Over Voltage Alarms
- Digital Battery Voltage Monitor
MT-4S Transmitter Specifications:
Output Power: 100mW
Nominal Input Voltage: 4.8v to 7.4v
Operating Voltage Range: 4.0v to 9.6v
Dry Weight: 13.68oz (388g)
Frequency: 2.4GHz FHSS
Modulation Type: FH2, FH3, FH3F, FH4T, FH4FT
RX-472 Receiver Specifications:
Nominal Input Voltage: 3.7v to 7.4v
Weight: 0.23oz (6.6gr)
Dimensions: 1.18 x 0.91 x 0.55in (30.0 x 23.3 x 14.0mm)
Frequency: 2.4GHz FH3/FH4T Selectable Via Transmitter
Fail Safe Support: Yes (All Channels)
Battery Voltage Fail Safe Limit: 3.5 to 5.0v (FH3) / 3.5 to 7.4v (FH4T)
Included:
- MT-4S Digital High-Response Telemetry Transmitter
- RX-472 Super Response Receiver w/SSL Support
- On/Off Switch
- Dry Cell Receiver Battery Holder
- Wrist Strap Mount
- Optional Large Grip
- Optional Throttle Trigger Angle Brackets
- Receiver Dust Boot Covers
Needed To Complete:
- (4) “AA” Batteries
Telemetry Note: Telemetry Capable Airtronics receiver required (RX-461 or RX-462) for full Telemetry capability.
Servo and/or ESC Note: Airtronics recommends using digital servos and ESCs that support a high frame rate whenever possible. Due to the extremely high frame rate of the MT-4S transmitter and RX-472 Super Response receiver, analog servos and many ESCs may not be compatible when used in SHR or SSR servo operating mode. To prevent compatibility issues, use analog servos only in NOR servo operating mode. If your ESC does not work in SHR servo operating mode, use NOR servo operating mode. Any brand and type of digital servo can be used in NOR or SHR servo operating mode. Only Airtronics/Sanwa SRG series digital servos are compatible for use with SSR servo operating mode.
