HoBao Racing 1/8 New Hyper VT On-Road Nitro RTR Black/Grey

$850.00

Category:

Description

Turn it loose!

The Hyper VT is built race ready. Straight out of the box, it comes factory-fitted with the powerful Hyper 30 Turbo Engine and equipped with all the gear you need to take the road by storm!
  • Hyper 30 turbo engine
  • HoBao digital metal gear steering servos with 196oz of torque
  • CNC aluminum front top plate
  • CNC aluminum front suspension block
  • CNC aluminum front and rear shock towers
  • Clear race body
  • 150cc High-capacity fuel tank with splash guard
  • Newly designed suspension
  • High capacity on-road shocks with 17mm pistons
  • Two speed transmission
  • Three shoe racing clutch with two speed clutch bell
  • Sealed receiver box
  • Two receiver battery positions
  • Polished in-line racing pipe
  • Threaded suspension adjusters
  • Front and rear sway bars
  • Dual stage air filter
Notes from our tech department:
This is the Hobao 1/8 scale, Glow Powered, Radio Controlled,
Ready to Run New Hyper VT On-Road Car with Gray Body

FEATURES

Chassis: Hard anodized T6 aluminum
Drive: Four wheel shaft,
Transmission: Automatic 2-speed
Differentials: Bevel gear
Engine: Hyper .30 cu in (4.9cc) with pull starter, large plastic
pull start handle Hobao T5 platinum glow plug, dual stage foam
air filter
Exhaust: Polished aluminum tuned pipe
Radio: Hobao HT-2.4EF 3-channel 2.4GHz FHSS with dual rate steering
and throttle, charge jack on transmitter for optional NiCd
batteries, HB5514 high output digital, waterproof, ball bearing
equipped steering servo, 194oz-in (14kg-cm) torque
Brake: Vented metal single disc
Clutch: Two-shoe composite, 18/22T steel clutch bell
Engine Mount: Finned aluminum for heat dissipation
Shocks: Oil-filled, aluminum body, 17mm Big Bore
Shock Towers: 0.16″ (4mm) thick CNC aluminum
Suspension: Front and rear sway bars, front C-hub suspension with
CVAs and CNC aluminum front suspension block
Steering: Ball bearing equipped with servo saver
Tires: Slick rubber with foam inserts
Wheels: 1/8 scale on-road, gray in color, 17mm hex
Ball Bearings: Full set included
Body: Trimmed and painted with high downforce black plastic wing
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Front Bumper: Foam

INCLUDES

RTR New Hyper VT Car with Shocks, Tires, Wheels, .30 cu in Engine
w/Pull Starter, Tuned Pipe, Glow Plug, Painted Body, Plastic Rear
Wing, Radio System and Instruction Manual

REQUIREMENTS

Nitro Fuel: Car blend with 15-30% nitro content, 30% required for
engine break-in
AA Batteries: 12, Eight for transmitter, 4 for battery box
Track and maintenance equipment

SPECIFICATIONS

Vehicle;
Length: 23.03″ (585mm)
Width: 12″ (305mm)
Height: 6.3″ (160mm)
Wheelbase: 12.9″ (328mm)
Weight: 8lbs (3,620g)
Body:
Length: 15.3″ (390mm)
Width: 12″ (305mm) at front wheels, widest point
10.4″ (265mm) behind front wheels, narrowest point
Height: 4.9″ (124mm)

COMMENTS

For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Front Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 8x16mm Fr Gearbox 1 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
2 8x16mm Steering Knuckles 1 DTXC1585
2 12x18mm Steering Knuckles 1 DTXC1597
4 6x10mm Steering 2 DTXC1561
4 8x16mm Rear Hubs 2 DTXC1585
2 8x16mm 2-Sp Assembly 1 DTXC1585
2 5x10mm Clutch Bell 1 DTXC1535