HoBao Racing VT GT RTR Brushless Car




Complete and ready to conquer!

Meet HoBao’s next-gen, 1/8 scale GT–the Hyper VTe. It’s a race ready 1/8 GT that comes fitted with a powerful HobbyWing brushless system. It features a new chassis design, new front and rear shock towers, new front and rear suspension arms, and a lot more. The car is very stable and has great cornering control. No matter if it’s a straight line down the track, multiple jumps or sharp turns, the Hyper VTe will give you confidence to overcome all obstacles!
  • HobbyWing waterproof 100A ESC
  • 2000Kv brushless motor
  • HoBao HB-5514MG digital metal gear steering servos with 196oz of torque
  • HoBao 2.4GHz wheel-type radio transmitter and receiver
  • Anodized aluminum countersunk chassis
  • 4mm Front and rear anodized aluminum shock towers
  • 17mm Big bore shocks with adjustable threaded bodies
  • Adjustable toe-in, camber, shock position, and wheelbase
  • Adjustable turnbuckles and Ackermann
  • 3 Oil-filled differentials
  • Rubber sealed bearings front and rear adjustable sway bars
  • Newly designed C-hub suspension with front CVAs
  • Sealed receiver box with battery cover
  • Movable battery position for LiPo battery
  • Newly designed rear mud guards
  • New front and rear chassis braces
  • New design front and rear lower arms
  • Aluminum shock towers
  • Steel spur gear
Notes from our tech department:
This is the Electric Powered, Radio Controlled 1/8 scale
Ready to Run Hyper-VTE On-Road Car with Blue Painted Body from Hobao.


Chassis: 0.14″ (3.5mm) thick T6 aluminum, gun metal gray in color
CNC aluminum top plate
Drive: Four wheel shaft with lightweight center shaft
Differentials: Front, center and rear, Bevel gear type
Motor: 2000Kv brushless
Motor Mount: CNC aluminum, adjustable
ESC: 100A with two T-plug battery connectors, cooling fan and
programming card
Radio: Hobao HT-2.4EF 3-channel 2.4GHz FHSS with dual rate steering
and throttle, charge jack on transmitter for optional NiCd
batteries, high output digital metal gear steering servo
Battery Box: Molded plastic, accomodates 2S, 3S and 4S LiPo packs,
three quick release hook and loop straps, dimensions-
5.5 x 1.8 x 1″ (140 x 45.7 x 25.4mm)
Shocks: Oil-filled 17mm aluminum body Big Bore
Shock Towers: 0.16″ (4mm) thick CNC aluminum
Pinion Gear: 16 tooth 32 pitch
Suspension: Front & rear anti-roll bars, CNC aluminum front
suspension block, newly designed front C-hub suspension with CVAs
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Body: Trimmed and printed 1/8 scale on-road car finish in dark blue
with decals applied, black plastic high downforce GT wing
Tires: Slick rubber with foam inserts
Wheels: 1/8 scale on-road, gray in color, 17mm hex
Front Bumper: Foam


RTR Hyper-VTE On-Road Car, Motor, Radio, ESC, Tires, Wheels, Shocks,
Body Rear Wing and Instructions


Batteries: Two 2S LiPo batteries with T-plug connector
Battery Charger: To match selected battery
LiPo Charging Bag
AA Batteries: Eight for transmitter
Track and maintenance equipment


Length: 23.03″ (585mm)
Width: 12″ (305mm)
Height: 6.3″ (160mm)
Wheelbase: 12.9″ (330mm)
Weight: 7.5lbs (3415g)
Length: 15.3″ (390mm)
Width: 12″ (305mm) at front wheels, widest point
10.4″ (265mm) behind front wheels, narrowest point
Height: 4.9″ (124mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
2 8x16mm Center Diff 1 DTXC1585
2 8x16mm Fr Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 8x16mm Fr Gear Box 1 DTXC1585
2 8x16mm Rear Gear Box 1 DTXC1585
2 8x16mm Fr Uprights 1 DTXC1585
2 12x18mm Fr Uprights 1 DTXC1597
4 6x10mm Steering 2 DTXC1561
4 8x16mm Rear Hubs 2 DTXC1585